Zyxel NWA1123-AC

ZyXEL NWA1123-AC

802.11 a/b/g/n/ac Dual-Radio Ceiling Mount PoE Access Point



OVERVIEW

The ZyXEL NWA1120 Series is a standard-based, SNMP-managed PoE Access Point (AP) that includes two 802.11n models: the 2.4 GHz NWA1121-NI and concurrent 2.4/5 GHz NWA1123- NI as well as the newly introduced NWA1123-AC featuring the advanced 802.11ac technology. The smoke detector look exterior makes the NWA1120 Series perfect for indoor ceiling-mount installation; with the optimized antennas built-in, its design solves the common interference issue in ceiling-mount deployments. The NWA1120 Series supports multiple operating modes, such as wireless client and repeater, which make it an ideal, flexible solution for small business, hotels and school nvironments.

• Compact ceiling-mount design with optimized RF performance

• High performance for better Wi-Fi experiences (IEEE 802.11n/IEEE 802.11ac)

• Easy RF planning with the same 2.4 GHz and 5 GHz signal coverage NWA1123-NI, NWA1123-AC)

• Flexible operating modes (standalone, client mode, root-AP/repeater mode)



SPECIFICATIONS

MAIN DESIGN

Wireless frequency

• 2.4/5 GHz



Radio

• 2



RF SPECIFICATIONS

Frequency band

• 2.4 GHz (IEEE 802.11 b/g/n)

• USA (FCC): 2.412 to 2.462 GHz

• Europe (ETSI): 2.412 to 2.472 GHz



• 5 GHz (IEEE 802.11 a/n/ac)

• USA (FCC): 5.15 to 5.35 GHz; 5.725 to 5.850 GHz

• Europe (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz



802.11 premium features

• 2x2 Multiple-Input Multiple-Output (MIMO) with two spatial streams

• Maximal Ratio Combining (MRC)

• 20-, 40- and 80-MHz channels

• PHY data rates total up to 300 Mbps (11n) + 866 Mbps (11ac)

• Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

• Cyclic Delay diversity (CSD) support

• Maximum Likehood Demodulation (MLD) support

• Low Density Parity Check (LDPC) Support



Maximum transmit power

• US (FCC) 2.4 GHz: 23 dBm, 2 antennas

• EU (ETSI) 2.4 GHz: 17 dBm, 2 antennas

• US (FCC) 5 GHz: 26 dBm, 2 antennas

• EU (ETSI) 5 GHz: 26 dBm, 2 antennas



Number of antenna

• 2T2R MIMO



Antenna gain

• 2.4 GHz: 3 dBi

• 5 GHz: 5 dBi



Support data rate

• 802.11 a/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps

• 802.11n: up to 300 Mbps in MCS15 (40 MHz; GI = 400 ns)

• 802.11ac: up to 866 Mbps in MCS9 (80 MHz; 2 spatial streams; GI = 400 ns)



LAN

Number of 10/100/1000M LAN

• 1



PoE

• Yes



PoE power draw

• 7 W



WLAN FEATURES

WEP

• Yes



WPA/WPA2-PSK

• Yes



WPA/WPA2-Enterprise

• Yes



EAP type

• EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST, EAP-AKA and EAP-SIM



WMM (Wi-Fi certified)

• Yes



IEEE 802.1X

• Yes



MAC filtering

• Yes



RADIUS authentication

• Yes



NETWORK

IPv6 support

• Yes



VLANs

• Yes



DHCP client

• Yes



MANAGEMENT

Standalone AP mode

• Yes



CLI

• Yes



SNMP

• Yes



OTHERS

Plenum rating

• Yes



Power supply

• Input: AC 100 - 240 V -50/60 Hz 0.3 A; Output: DC +12 V 1 A



MTBF (hrs)

• 656.972



STANDARD COMPLIANCE

Ethernet

• IEEE 802.3, IEEE 802.3u, IEEE 802.11ac, IEEE 802.3az, IEEE 802.3af



WLAN

• 802.11b: DBPSK, DQPSK, CCK

• 802.11g: BPSK, QPSK, 16-QAM, 64-QAM

• 802.11a: BPSK, QPSK, 16-QAM, 64-QAM

• 802.11n: BPSK, QPSK, 16-QAM, 64-QAM

• 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM



CERTIFICATIONS

Radio

• FCC Part 15C, FCC Part 15E,

• ETSI EN 300 328, EN 301 893,

• LP0002, EN 60601-1-2



EMC

• FCC Part 15B, EN 301 489-1, EN 301 489-17, EN55022, EN55024, EN61000-3-2/-3, BSMI CNS13438



Safety

• EN 60950-1, IEC 60950-1 BSMI CNS14336-1



PHYSICAL SPECIFICATIONS

Item dimensions (WxDxH)(mm)

• 130 x 130 x 54.5



Item weight (g)

• 260



Packing dimensions (WxDxH)(mm)

• 282 x 207 x 71



Packing weight (g)

• 640



ENVIRONMENTAL SPECIFICATIONS

Operating environment temperature

• 0°C to 50°C



Operating environment humidity

• 10% to 90% (non-condensing)



Storage environment temperature

• -30°C to 70°C



Storage environment humidity

• 10% to 90%